Live editing is no longer limited to turning small knobs on your old analogue equipment... it is now possible to adjust parameters via MIDI! Each slider or button may generate controller information, sysex, notes, program change, pitchbend or aftertouch or a combination of these. Editing is simple with the aid of a backlit LCD display and easy to use interface. Just imagine being able to control parameters such as VCF, pan, and pitchbend on your sequencer.

CONTROL FREAK STUDIO EDITION

The Control Freak STUDIO EDITION gives you the flexibility of simultaneous 16 channel fingertip control through its 16 sliders & 16 multi-function buttons. All the MIDI control you could ever need, instantly to hand when you need it.

CONTROL FREAK ORIGINAL

The functionality of the STUDIO EDITION at a lower cost. With 8 sliders and 8 buttons the Control Freak ORIGINAL is the perfect choice where size and portability are important considerations. An ideal solution for the gigging musician.

• Features standard on all models:
• Super-fast response times
• Famous Kenton build quality
• High specification D/A converters for rock-steady pitches
• ‘Volts per octave’ & ‘Hertz/Volt’ tuning
• Programmable Gate out(s) inc. S-Trig
• MIDI syncable LFO(s)
• MIDI IN/THRU
• MIDIanalyser mode
• Portamento
• Note priority selection
• Set-ups stored in non-volatile RAM
• Nine waveform LFO(s)
• Programmable auxiliary CV output(s)

PRO-2000

The PRO-2000 features 2 CV & Gate outputs, 6 fully programmable auxiliary CV outputs, 2 LFOs and 7 user memories. DIN Sync 24 and Arpeggio clock outputs are also fitted as standard. Backlit LCD display. The auxiliary outputs can also drive another 3 CV/Gate synthesisers if required. Optional extras: 1U rack-mount kit, KADI/Wasp or DCB port.

PRO-SOLO

The PRO-SOLO is designed to control one monosynth and features a single CV & Gate output, fully programmable auxiliary CV output and 1 LFO. Editing is easy with its LED display and non-volatile setup memory. Can also be used as a Sync 24 and arpeggio clock converter.

KENTON MIDI - DIGITAL CONVERTERS
 
PRO-DCB for Juno-60 or Jupiter-8

• Juno-60 or Jupiter-8 MIDI converter
• The Pro-DCB is a bi-directional MIDI-DCB converter. It is the most economical and effective way of making your treasured Juno-60 or Jupiter-8 MIDI compatible.
• Not only can you control your synth via MIDI, but it is also possible to play your analogue keyboard and generate MIDI out! This unit also has the ability to control the filter, and sync the arpeggiator to MIDI clock. It also has a built-in, programmable, and MIDI-syncable LFO, which can be applied to the VCF.
• The Pro-DCB comes complete with connecting cable and combines value for money with Kenton's world-famous build quality.
• MIDI analyser mode
• Arpeggio clock output
• Can send Arpeggiated MIDI
• Set-ups stored in non-volatile RAM
• Nine waveform LFO
• Programmable auxiliary CV output

• MIDI trigger unit for TR-808, TR-606, EDP Wasp and many other uses.
• This multi-mode MIDI trigger unit is highly configurable and capable of driving up to 13 outputs. It will control most analogue drum machines that can be controlled via trigger pulses and has many other uses such as lighting control — indeed any situation where control from MIDI is required.
• Kenton can supply and fit sockets to interface your drum machine with the PRO-KADI. Kits are available for the TR-808, TR-606, CR-78 and CR-8000, Simmons SDS-5 and 7.
• In addition to KADI control, DIN sync 24 and arpeggio clock outputs, the Pro-KADI has the ability to control the EDP Wasp and Gnat synths.
• This highly configurable unit can be programmed to respond to patch numbers instead of notes and the length of trigger pulses can be adjusted.
• A free WASP or KADI cable is included