Kit to add filter and modulation control sockets to the Roland SH-101
This synth already has suitable CV and Gate sockets, so it is not necessary to add them.

The additional sockets will provide:
A voltage control input for the cutoff frequency of the low pass filter of the synth
A voltage control input for the modulation depth of the SH-101's inbuilt LFO.

Control can be acheived using the Aux outputs of one of our MIDI to CV converters, such as the Pro-Solo mkII or Pro-2000 mkII. You can then control the inputs using any continuous controller (cc) or other MIDI messages such as Aftertouch or Velocity.

The kit contains all necessary components and diagrams for connecting the wires / components, and mounting the 3.5mm mono jack sockets.

Note: All Kenton converters (except the discontinued Pro-2) have MIDI controllable / MIDI syncable LFOs built in, so unless you have a Pro-2 you only really need the filter socket only version of this kit.

It is not possible to synchronise the speed of the internal LFO of the SH-101 - use the LFO inside the converter.